Water to Weighted Keel Decoys
Posted: Wed Jun 18, 2003 10:22 am
Is there any proven way to transform your water keels into weighted?? 
TAKES ABOUT 10 MIN PER DECOYPage 1 of 1
Posted: Wed Jun 18, 2003 10:29 am
SAND AND JB WELD TAKES ABOUT 10 MIN PER DECOY
TAKES ABOUT 10 MIN PER DECOYPosted: Wed Jun 18, 2003 10:46 am
I use sand and a hot glue gun. Very inexpensive and will outlast the paint on your decoys, even G and H decoys.
Posted: Wed Jun 18, 2003 4:55 pm
Or sand and big ole dob of silicon.
Posted: Wed Jun 18, 2003 5:07 pm
take some pieces of re-inforcing rod {rebarb} and drive into the keel of flambeau dekes... the steel used in concrete slabs.... or take some 5/8th bolts X 5 in. and insert into keel..... try them out in a bucket of water til you get it right......
judge jb
judge jb
Posted: Wed Jun 18, 2003 7:47 pm
You can get used tire weights for free from any tire store. They have just about the right amount of bend in them where you can drive them into your keel and they will stay put.
Posted: Wed Jun 18, 2003 9:35 pm
Get cotton spindles and drive them into the keels. Works well on those old flambeau dekes. Can probably pick some up for free from a fellow forum member.
Posted: Thu Jun 19, 2003 9:04 pm
There are some pretty darn good ideas here fellas. Some that I had forgotten from previous posts.