Page 1 of 1
anbody tried a sure cycle . . .
Posted: Mon Jan 26, 2009 3:43 pm
by dukewoody
Having trouble with my shotgun cycling all types of loads, including high brass and steel shot. Gun has been cleaned, oiled, dried, the works. Wondering if anyone has tried the sure cycle system.
Re: anbody tried a sure cycle . . .
Posted: Mon Jan 26, 2009 4:00 pm
by GulfCoast
Have you checked the bolt return spring in the stock?
Re: anbody tried a sure cycle . . .
Posted: Mon Jan 26, 2009 4:03 pm
by dukewoody
been checked and cleaned. I am not an expert but there doesn't appear to be anything wrong with the spring. Reason I am asking is that two different gunsmiths I talked to recommended the Sure Cycle System.
Re: anbody tried a sure cycle . . .
Posted: Mon Jan 26, 2009 4:15 pm
by GulfCoast
I would try a Wolff replacement spring and see if that works before I forked out for a whole sure cyle. Might save you $100.00
Re: anbody tried a sure cycle . . .
Posted: Mon Jan 26, 2009 5:21 pm
by Up2Early
Do it
Re: anbody tried a sure cycle . . .
Posted: Mon Jan 26, 2009 6:57 pm
by champcaller
i just purchased one for my M1
Re: anbody tried a sure cycle . . .
Posted: Mon Jan 26, 2009 8:42 pm
by Meeka
Sure cycle wasn't an improvement for me.
Re: anbody tried a sure cycle . . .
Posted: Tue Jan 27, 2009 6:47 am
by crackhead
Is this something you can do your self or gunsmith route?
Re: anbody tried a sure cycle . . .
Posted: Tue Jan 27, 2009 7:15 am
by GulfCoast
Its a 5 minute project for a "do it yourselfer."
Re: anbody tried a sure cycle . . .
Posted: Tue Jan 27, 2009 8:30 am
by QUACKERS
the one I purchased from gulfcoast fixed my gold hunter issues
Re: anbody tried a sure cycle . . .
Posted: Tue Jan 27, 2009 12:54 pm
by sondance
Got one on my Gold and it has worked well for me. I have had it for about 3 years
Re: anbody tried a sure cycle . . .
Posted: Tue Jan 27, 2009 1:08 pm
by The Waterfowler
We've got 7 SBE's and 3 Browning 10's all with Sure Cycles. Makes good guns better.