DuckSouth.com

does anyone know of someone that builds blinds in the south delta. i am looking to get a couple for next season and just dont have the time to build some myself. if you could tell where and the price thanks.

A few buddies and I (mostly the few buddies) built a skid blind. One of us wants to build a few and sell. If you want I will see if they want to build some more to sell. They seat 4 -5 easy. have a "trap door" on the front. We can inclose the sides but chose not to on this one because there are usually 2 dogs hunting in our group. Easy to dress to suit your setup.
Here are some pics.

I had some built in Marks Ms, mine were floaters,12 ft long, 5 ft wide, 50 inch tall in the back 48 in the front. Three drums in front and 3 in the back, pontoon boat style.

He can put together anything you want, ours were 1 inch steel tubing, with plywood all around (we did the plywood).

I was one of the few building those blinds in the teul's pics. We can build 'em as big or as small as you want. They are as sturdy as anything out there, probably more sturdy than most commercial skids and pull very easily behind a 4-wheeler. I pulled that particular blind to another hole Sunday in thru deep mud and about 1.5 feet of water with no problem.

Call Daron Nichols @ Nichols Welding 662-455-5592 in Greenwood

Are you looking for skid or pit blinds, if you want PM me I've got a good source of some of the best roll top pit blinds I've ever hunted from, they usually run about $100/foot for the blind itself.

Gordon